When to Replace Your Tires
Camille Dubois
| 16-11-2026

· Automobile team
Plenty of drivers treat tire replacement as a mileage question, waiting for the odometer to reach a certain number before they think about it. But the odometer can't tell you what condition your tires are in.
Tread depth, age, and visible damage each tell you something different. Checking all three helps you distinguish a tire that can stay in service from one that needs a closer look or immediate replacement.
Tread depth
Replace a tire when its tread wears down to 2/32 of an inch. To check with a penny, place it upside down in a tread groove with Lincoln facing you. If you can see the top of his head, the tire is due for replacement.
Check several places across the tread, including the inner and outer edges. A reading in the center can miss a worn shoulder. You can also look for raised wear in the grooves. If the surrounding tread is flush with the wear, it's time to replace the tire.
Shallower tread provides less grip on wet roads, so don't treat the replacement threshold as a target to aim for. A tread depth gauge gives you a reading you can track from one check to the next, rather than just telling you whether the tire has reached the minimum.
Tire age
A tire that sits in a sunny driveway can age before it wears down. Rubber and other tire materials change over time, even on a spare that's never touched the road. Some vehicle and tire makers recommend replacement at six to ten years, regardless of tread depth. Check the guidance for your vehicle and tires.
The last four digits of the tire identification number give the week and year of manufacture. For example, 2321 means the tire was made in the 23rd week of 2021. Check the other sidewall if you can't find the full code. If you're buying used tires, read the date code before judging them by their tread.
Damage and uneven wear
A sidewall bulge is a sign of structural damage. Take the tire out of service immediately, even if the tread looks fine. Cracks in the rubber, often called dry rot, can appear in the grooves and along the shoulder. Have a tire professional assess them.
If one edge is bald and the other still has tread, have the alignment checked. Replacing the tire without correcting the cause can leave the new one wearing unevenly, too. If a tire keeps losing pressure, get it inspected rather than just topping it up.
A puncture in the sidewall or shoulder isn't repairable. A small nail puncture in the center tread may be, but a technician needs to remove the tire from the wheel and inspect the inside first. A plug alone isn't a proper repair.
Rotation and replacement
Front tires on a front-wheel-drive car handle both steering and driving forces, so they can wear faster than the rears. Rotation helps spread that wear. Follow the schedule and pattern in the owner's manual, since some vehicles have different tire sizes front and rear and may not allow rotation.
Replacing the whole set helps keep handling consistent. If you're replacing only two tires, put the new pair on the rear axle to improve rear grip on wet roads. Check the owner's manual for any vehicle-specific requirements before mixing tires with different tread depths.
Choosing the next set
Use the size, load index, and speed rating recommended by the vehicle manufacturer. The load index indicates how much weight a tire can carry. Compare warranty terms for the models you're considering rather than treating a mileage warranty as a replacement schedule. Keep your receipts and rotation records in case you need to make a claim.
Before your next tire appointment, note which wheel each tire came from and where you noticed unusual wear. That gives the technician a starting point for checking what caused it.